DOUBLE XP WEEKEND SALE HAS ENDED -- THANKS FOR ALL YOUR SUPPORT!

Download The NX Launch Pad


AutoFighter.org Bot Client

The bot client is a piece of software that lets you access your bots. To use it you take the codes we give you for free bots or the codes you get when you purchase a bot. Once you enter your unique bot code into the software you can access the RuneScape bot.

The bot client is required to run any of bots and allows you to receive bot updates and change important settings for runescape botting.
Below you will find the download link. The botclient software only needs to be installed once and will auto-check for important updates. This software will install on a PC or Intel MAC computer.

For our bots to work you need to use runescape's safe mode with the lowest graphical settings -- Please refer to [this picture] for a better idea.

Click the button to download the bot client.
You only need to install it once and it works for all the bots.

You must use RuneScape's safe mode!

Installation Instructions
The bot client no longer requires the install of the Java Development Kit unless you encounter the BSOD, otherwise you can just download the bot client and install it by following these instructions.

What is the BSOD
On some computers the Java Path for running the bots are not automaiclly set so it causes a blackscreen to flash and then shuts down. When this happens you need to follow the advanced instructions on installing the bot client.

Windows Install Manual (Simple)

  1. Check to see if you have Java installed on your computer already by clicking here. If not, then click the "Download Java Now" button, or get it manually from the Java Downloads page.
  2. After Java has finished downloading to your computer, install it.
  3. Now make sure you have the bot client from our download section.
  4. Unzip (extract) botclient.zip to a new folder on your desktop. You can do this by using the windows extract tool or some other program like WinRAR. (System asking you to overwrite files? You need WinRAR to extract)
  5. Click on install-windows.bat. NOTE: Make sure you run in administrator mode (right click and select run as admin).
  6. Select the Windows 32bit option for 32 bit processors or the Windows 64bit option for 64 bit processors. Most users will have 32 bit processors.
  7. Select the current version of the bot client you want to install.
  8. Select the SQLite Universal option.
  9. Click the Install button.
  10. The bot client is now installed. Double click run.bat to start your bot client! NOTE: If you have 1 GB or less of ram, you may get errors when trying to launch from run.bat. You will need to launch from run-with-cmd-lowram.bat instead.
  11. Wait a moment for the bot client to start up (This could take a few minutes depending on server load). Add your bot's auth code, and continue.
  12. NOTE: Do not press any keys while the bot client is starting up, even if prompted to do so by the cmd window.


Windows Install Manual (Advanced BSOD)

If you are one of the users experiencing the black screen shut down (after opening install-windows.bat you see a black screen and it closes very fast) you need to install the bot using our advanced method. What this means is that your system is not configured already to read java files.

You should only be doing this method if the simple install didnt work for you. The following guide is using a Windows 7 system but can be used to install on any system using subtle differences.
  1. Right click my computer and select properties
  2. Click Advanced System Settings
  3. Clikc Advanced Tab> Click Environment Variables
  4. Under System Variables Find "Path" and double click
  5. Here is a sample of what the line should have in it already (depending on system)

%SystemRoot%\system32;%SystemRoot%;%SYSTEMROOT%\System32\QuickTime\QTSystem\

  1. Now you need to install JDK by going here. (As of 9/6/2010 the JDK is version 6 update 21)
  2. Download and install.
  3. Now for you to run the bots your system needs to know where those java files are. To tell your system where it is you need to find the path and input it in the System Variables path we opened earlier. To find the path to the java files you just installed continue to step 4.
  4. Open my computer > open your C: drive usually named local disk > open Program Files (x86) (just "program files" for other systems) > open java > open jdk(version_numbers) > open the bin folder.
  5. Copy this whole path to the bin folder
  6. Should look like this C:\Program Files (x86)\Java\JDK(version_numbers)\bin
  7. Now go back to the window system variables path window and add that path at the end. DO NOT DELETE ANYTHING!
  8. Now add a semicolon ";" without the quotes -- to the begining and end of the path we just put in! It is very important that you do this or the bots will not work!
  9. It should look something like this -- Take into account different paths and java version cause your computer is different

%SystemRoot%\system32;%SystemRoot%;%SYSTEMROOT%\System32\QuickTime\QTSystem\;C:\Program Files (x86)\Java\jdk0.0.0_00\bin;

  1. Click ok > click ok on the next window > click ok on the next window
  2. Open your botclient folder on your desktop
  3. Click on install-windows.bat. NOTE: Make sure you run in administrator mode (right click and select run as admin).

If the black screen comes up and shuts down again please stop and check over steps 1-4 and then steps 1-9 cause you didn't install correctly. If the black screen didnt quit you can continue.

  1. Select the Windows 32bit option for 32 bit processors or the Windows 64bit option for 64 bit processors. Most users will have 32 bit processors.
  2. Select the current version of the bot client you want to install.
  3. Select the SQLite Universal option.
  4. Click the Install button.
  5. The bot client is now installed. Double click run.bat to start your bot client! NOTE: If you have 1 GB or less of ram, you may get errors when trying to launch from run.bat . You will need to launch from run-with-cmd-lowram.bat instead.
  6. WWait a moment for the bot client to start up (This could take a few minutes depending on server load). Add your bot's auth code, and continue.
  7. NOTE: Do not press any keys while the bot client is starting up, even if prompted to do so by the cmd window.

Mac Install Manual

This manual is directed toward Mac users. Installation for Linux users is relatively the same with exception to a few filename differences. An intel mac is required to use on Mac OS systems.

  1. Download the bot client from the download section.
  2. Create a new folder on the desktop and name it botclient
  3. Unzip botclient.zip to the new folder you just made on your desktop.
  4. Open the Mac Terminal by going to Applications > Utilities > Terminal.
  5. Change to your botclient folder by using the cd command (i.e. cd Desktop/botclient). For more help on using the Mac Terminal, check out http://macapper.com/2007/03/08/the-terminal-an-introduction/ .
  6. Next, in the Terminal type in sudo chmod a+x install-mac-linux.sh followed by your admin password when prompted to set the correct permissions to execute.
  7. Type ./install-mac-linux.sh . This will launch the bot installer.
  8. Select the MacOSX 64bit option for 64 bit processors or the MacOSX 32bit option for 32 bit processors. Most current Mac users will have 64 bit processors.
  9. Select the current version of the bot client you want to install.
  10. Select the SQLite Universal option.
  11. Click the Install button.
  12. The bot installer is now finished. Now type chmod a+x run.sh to set the correct permissions to execute.
  13. Now type ./run.sh to start the bot client.
  14. Add your bot's auth code, and continue.